EVEREST HYBRID CARBON POLE AND TANK KIT

AVAILIABLE IN 15FT AND 25FT OPTIONS 

KIT INCLUDES POLE, FLEXI HOSE, GOOSENECK, 11" WATERFED WINDOW BRUSH, TANK, 2X RESIN, TDS METER, PRE FILTER

The Everest 10L DI Tank is a compact, professional pure water system designed to produce spot-free results without chemicals.

Using ion exchange resin, it removes dissolved minerals from tap water so glass, frames, and panels dry naturally without streaking.

Ideal for window cleaners, solar panel cleaning, and exterior washing, this unit offers a simple and reliable entry into pure water cleaning.

Key Features

10L Resin Capacity
Provides a good balance between portability and output—suited for residential and light commercial work.

Compact & Portable Design

• Dimensions: W40cm × H59cm × D21cm
• Easy to transport and store in vans or utes

Pure Water Output (0 TDS)
Removes minerals such as calcium and magnesium to deliver a spotless finish.

Pre-Filter Included
Built-in sediment and carbon filtration helps protect the resin and improve efficiency.

Simple Setup
Connect directly to a standard hose and water-fed pole system. No power required.

Flow Control Valve
Adjust water flow to suit different cleaning tasks.

How It Works

1. Tap water enters the tank
2. Water passes through mixed-bed DI resin
3. Dissolved solids are removed
4. Pure water exits the tank
5. Surfaces dry spot-free without wiping

Where It Works Best

• Commercial and Residential window cleaning
• Shopfronts and small commercial sites
• Solar panel cleaning
• Vehicle washing and detailing

Why Use a DI Tank?

• No chemicals required
• No wiping or squeegeeing needed
• Faster cleaning times
• Safer – reduces ladder use when paired with poles

Resin & Running Cost Guide

The Everest DI tank uses mixed-bed ion exchange resin, which gradually exhausts as it removes minerals from water.

Typical Fill

• Tank capacity: 10L resin
• Equivalent to: 2 × 5L bags

Resin Cost Example (NZ)

• 5L bag: approx. $49.95 + GST
• Full refill: approx. $99.90 + GST

🔢 Simple Resin Cost Calculator 

IMPORTANT

Your running cost depends on your local water quality (TDS level).

Example – TDS Reading approx. 60–80 ppm

• 1 full tank (10L resin) can typically produce:
  ~1,500 – 2,500 litres of pure water

Cost per 1,000L:

• $100 ÷ 2,000L ≈ $50 per 1,000L

Real Job Example:

• Average house wash uses ~100–150L
• Resin cost per job ≈ $5 – $7

👉 This makes DI systems very cost-effective for comercial and residential work.

When to Replace Resin

• Recommended change point: above 10 ppm

Best Fit For

✔ Owner-operators
✔ Start-up window cleaners
✔ Solar panel cleaning
✔ Commercial work